HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

PRODUCT DESCRIPTION:
Foil-Scrim-Kraft backing, combined with a transparent water-based adhesive, protected by an easy-release silicone release paper.

TYPICAL PHYSICAL PROPERTIES:
Peel Adhesion: 10-12N/25mm (GB/T2792-1998)
Rolling Tack (11mm ball): ≤10 cm (GB/T4852-84)
Holding Power: ≥2000 Min (PSTC-7)
Service Temperature ranger: +20 ~ +120°C

Sizes of Cut Roll:
Width: 48mm, 50mm (2"), 60mm, 63mm (2.5"), 72mm, 75mm (3"), 96mm, 100mm (4").
Length: 27m (30 yards), 30m (100 feet), 45m (50 yards), 50m, 100m.
Core I.D.: 3"(76mm 1)

Sizes of Log Roll: 1200mm x 45m, 1200mm x 30m, 1200mm x 27m.
Sizes of Jumbo Roll: 1200mm x 730m, 1200mm x 750m
Based on order, special sizes and log rolls or jumbo rolls are also available.

1. The products should be stored at room temperature and kept from wet and keep away heat source.
2. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.