HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

PRODUCT DESCRIPTION:
Foil-Scrim-Kraft backing, combined with a transparent high performance solvent acrylic adhesive, protected by an easy-release silicone release paper.

FEATURES:
• Foil-Scrim-Kraft backing provides excellent reflection of both heat and light.
• High quality adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,
• Low moisture vapor transmission rate makes T-FSK7150 an excellent vapor barrier.
• Service Temperature range from -20℃～+80℃ （-4℉～+176℉）

TYPICAL PHYSICAL PROPERTIES:
Peel Adhesion to backing: 16-23N/25mm (PSTC-1)
Rolling Tack (11mm ball): ≤20 cm (PSTC-6)
Holding Power: 1000+Min. (PSTC-7)
Service Temperature ranger: -10°C +120°C

PRODUCT FORM & SIZE AVAILABLE:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 750m/ 730m

STORAGE & SHELF LIFE: One year when stored at 21℃ (70℉)/50% relative humidity out of direct sunlight..
SURFACE PREPARATION: It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, free of grease, oil or other contaminants.
PRODUCT USE: It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10℃ ~ +40°C (+50℉ ~ +105℉)