HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

CONSTRUCTION:
Backing: Foil-fiberglass Cloth Laminate (Foil 18u / Fiberglass Cloth 80gsm)
Adhesive: Flame-retardant, solvent-based acrylic adhesive
Liner: Silicone release PE-Coated paper, white color.

TYPICAL PHYSICAL PROPERTIES:
Peel Adhesion to backing: 15N/25mm (PSTC-1)
Rolling Tack (11mm ball): ≤20 cm (PSTC-6)
Fire Rating Class “O” (BS476 Pt.6 & 7)
Service Temperature ranger: -10°C +120°C

Sizes of Cut Roll:
Width: 48mm, 50mm (2"), 60mm, 63mm (2.5"), 72mm, 75mm (3"), 96mm, 100mm (4").
Length: 27m (30 yards), 30m (100 feet), 45m (50 yards), 50m, 100m.
Based on order, special sizes and log rolls or jumbo rolls are also available.

1. The products should be stored at room temperature and kept from wet and heat source.
2. Shelf life:One year when stored at 21℃ (70℉)/50% relative humidity out of direct sunlight.
3. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
4. The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for user’s special purpose and technique.