HVAC industry for joining and sealing Foil-Scrim-Kraft Facing laminated fiberglass blanket / duct board joints and seams; joining and sealing flexible air duct seams and connections. May also be used for other industrial uses requiring a tape with these characteristics and benefits.

PRODUCT DESCRIPTION:
A 50 micron (2.0 mil) dead soft aluminum foil backing, combined with a high flame-Retardant synthetic rubber resin adhesive, protected by an easy-release silicone release paper.

FEATURES:
• Aluminum backing provides excellent reflection of both heat and light.
• Surface burning characteristic tested as per UL723 standard.
• High quality flame-resistance adhesive with super strong adhesion and holding power offers reliable and durable Foil-Scrim-Kraft Facing joints and seams sealing in HVAC ductwork application,
• Low moisture vapor transmission rate makes T-H5001UL an excellent vapor barrier.

TYPICAL PHYSICAL PROPERTIES:
Peel Adhesion to backing: 25N/25mm (PSTC-1)
Rolling Tack (11mm ball): 20 cm (PSTC-6)
Holding Power: 5000+Min. (PSTC-7)
Service Temperature ranger: -20°C +80°C
Flame Spread 5(≤25) (UL723)
Smoke Developed 15-50(≤50) (UL723)

PRODUCT FORM & SIZE AVAILABLE:
Cut Roll: 48 / 50mm (2") / 60 / 63mm (2.5") / 72 / 75mm (3") / 96mm / 100mm (4").
Log Roll: 1200mm x 45 / 50m Jumbo Roll: 1200mm x 1200m

STORAGE & SHELF LIFE: One year when stored at 21℃ (70℉)/50% relative humidity out of direct sunlight.
PRODUCT USE: It is essential that the user evaluate the product to determine whether it is fit for a particular purpose and user’s method of application. Good results will be obtained when applied to a clean, dry surface with a suitable pressure on product between +10℃ ~ +40°C (+50℉ ~ +105℉)

UL723 testing report